- Screeding over membranes, wood, and steel decking.
- 3” diameter cast aluminum with 1/2" diameter male threads.
- Fits perfectly with C&H Screed Pad Posts.
- Cast in Steel, Heavy Duty on 3/4" diameter post.
- Plate dimensions 3x3” with 6 holes (3 on each side) that fits 3/16” nails.
- Set screw firmly clamps against screed post.
- Cast in steel heavy duty durability 2x4” Single Screed Hook.
- In conjunction with the ¾” diameter round stakes is used to set 2x4” screeds.
- Cast in heavy duty steel.
- Double 2x4” round hole form hook.
- In conjunction with ¾” diameter round stakes is used to set 2x4” lumber screeds.
- Cost effective spring steel 2x4” screed hook.
- Fits ¾” diameter steel stakes.
- Snaps onto form pins and support 2x4's for screed bonds.
- Unique design fits both flat and round stakes.
- Ease of use allows for quick adjustment.
- Cold Rolled Steel-heavy duty ¾” diameter Screed Pad Post with 1/2" diameter female threaded hole.
- Fits with C&H Aluminium Screed Pad when screeding over waterproof membrane.
- Staggered 3/16” nail holes on 1” on spacing diameter permit nailing to the form at any point.
- Available in the following sizes: 12", 18", 24", 30", 36", 48"
- Cold Rolled Steel ¾” diameter Post for wood forms and screeds.
- Staggered 3/16” nail holes on 1” on spacing diameter permit nailing to the form at any point.
- Available in the following sizes: 18”, 24”, 30”, 36”, 48”
- AKA Forming Pins and Nail Stakes.
- Cold Rolled Steel Heavy duty ¾” diameter drive-in Screed Post Stake.
- Staggered 3/16” nail holes on 1” on spacing diameter permit nailing to the form at any point.
- Properly designed short points drive easier and faster for positive anchoring in any soil or subgrade conditions.
- Available in the following sizes: 12", 18", 24", 36", 42", 48”, 60", 72"
- Betonamit Non-Explosive Demolition Agent concrete cracking agent. Non-toxic.
- Mixed with water and poured into holes 1 1/4", 1 3/8" or 1 1/2" diameter, it hardens and expands, exerting pressures of 12,000 psi.
- Concrete, boulders, and ledge are fractured overnight.
- No noise, vibration, or flying rock.
- No licenses or permits required. Three-year shelf life.
- 11 LB. bag (5 KG)
- AKA Hickey Bar and Berkeley Bender
- Strong steel: easy and simple to use.
- It provides enough leverage to bend up to 5/8" #5 rebar.
- Highly useful in adjusting rebar position/placement.
- Length: 37” Weight: 4.2 LBS (8.4 LBS pair)
- Outstanding leverage and pulling to remove concrete form stakes and pins from the ground without bending.
- Heavy-gauge steel and is galvanized for long life.
- Pulls up to 7/8" round stakes & 1 1/2" flat stakes.
- Jaws are reversible, thus extending the life of the tool.
- Wire secures rebar in place and ties rebar together.
- It’s pliable annealed design ensures a snug and secure tie.
- Strong enough to Bundle Rods, Pipe And Lumber.
- 16-gauge workable wire supports various tie types, including saddle tie, wrap and saddle tie and figure-8 tie, helping to ensure consistency